Mobile Diesel Light Tower - DMLT6H-17

Mobile Diesel Light Tower - DMLT6H-17

> Cab passed 2000 hours salt spray test

> Standard automatic 340° light routing system

> 80km wind resistance

> 6 or 4x1000watt metal halide lamp option

> 6 or 4x240watt LED lamp option

> Hydraulic/Mechanical tower option

> Hydraulic/Mechanical stabilizer option

> Custom color option

> Single or double axle trailer production option

https://www.solilamp.com/

HYDRAULIC/PNEUMATIC MAST

The mast movement of the light tower is done with the help of hydraulic piston and pump or pneumatic compressor. It can be easily controlled with a joystick on the control panel.

MECHANICAL MAST

The mast movement of the light tower is done with the help of a mechanical crane. The mast is brought to the horizontal position with the help of a mechanical crane. It occupies less space in terms of height compared to the hydraulic mast.

METAL HALIDE LUMINAIRE OR LED LUMINAIRE

>The bulbs in the fixture are manufactured as metal halide. They have high radiation capacities. It should be waited for it to warm up for full capacity.

>The bulbs in the fixture are manufactured as LED. They have high radiation capacities. Energy consumption is low.

ARMATURE MOVEMENT

Luminaires can be directed with the joystick on the control panel by means of electric motors. Movement can be provided for horizontal and vertical axis. In addition, each luminaire can be manually adjusted on its own axis.

HYDRAULIC STABILIZER

It is a hydraulic piston and pump driven fixing system for the use of the lighting set on uneven surfaces. It is generally positioned in the form of 4 units in the environment. Their number may vary according to need.

MECHANICAL FIXER

It is a fixing system with a mechanical jack for the use of the lighting set on uneven surfaces. It is generally positioned in the form of 4 units in the environment. Their number may vary according to need.

TRAILER AND BRAKE SYSTEMS

RING TYPE ARROW HEAD OR DRAWING ARROW

>Ring type arrowhead can be manufactured as a coupling or according to special standards (eg NATO).

>Drawbar systems can be manufactured as fixed type or adjustable type. There are options with or without brakes.

AXLE LOCATIONS

Axle placements can be adjusted according to the load and customer demand. Generally ideal for single axle load distribution. However, it can be diversified according to need. The adjustable type of drawbar can be used with different vehicles.