Things to Consider When Installing a Roof Solar Energy System

When roofs are covered with solar panels, it is very important to evaluate the electricity generation potential in that area. Because it has a significant impact on the reliability of solar-powered electricity in that region. This means that places where sunlight is more irregular require energy storage solutions.

Rooftop solar panels would be useful in low-population areas as well as in city centers. For those living outside the city (counties, villages, etc.), the panels help to fill the supply from potentially unreliable local grids and become a strong grid. For city dwellers, however, the panels can significantly reduce air pollution from burning fossil fuels for energy.

Rooftop solar panels could be the key to expanding electricity access to more remote areas. It is vital to note that the global electricity supply cannot rely on a single source of generation to meet the needs of billions of people. Thanks to the weather conditions and the day-night cycle of our planet, the demand for solar energy is also increasing in Turkey.

Roof solar energy systems enable facilities with electricity subscription to benefit from electricity generation by using their existing roofs. Roof GES has quite extensive usage areas such as residences, cold storages, livestock facilities, shopping malls, factory facilities and so on. There are many important considerations when you decide to install a solar power plant in your facility. These are the factors that will affect the condition of your roof and the maximum efficiency of the solar energy to be installed. The most important point in producing efficient energy should be in choosing a company.


There are many issues to be considered in the installation of the roof SPP. Now let's take a look at these issues together;

-ROOF DISCOVERY

It is very important to make an exploration for the area planned to be installed. The on-site exploration of the area, which will be made by a team of experts, is very important as the engineers will have clearer information during the layout and project design phase. Discovery affects many factors from project design to the type of material to be used, its dimensions and volumes. The fact that the project is created far from reality causes disruptions in technical feasibility, causes deviations in the calculations of the turnaround time, conflicts with the connected Electricity institutions and causes problems in the implementation of the process as a result of the incompatibility of the area with the project during installation. The main important points to be considered during the discovery; transformer power and the distance to the roof where the installation will be made. The contractual power between the investor and the affiliated Electricity institution is the roof material, dimensions, direction and slope.

-STATIC

A static examination of your roof will provide the necessary information about whether your building is technically sufficient for the system to be installed. If, as a result of the static examination, it is concluded that your roof will not cause a problem in the installation of the Solar Power Plant, the construction and installation of the panels can be done without any problems. However, as a result of the static examination, it was determined that the roof was not sufficient in the installation of the GES, and the roof should be strengthened by doing the necessary work. Otherwise, you may encounter many mishaps during or after installation. At the same time, in order to receive the GES conformity letter during the project approval, you must submit the static inspection report approved by the civil engineer.

-MATERIAL SELECTION
Before the roof solar energy installation, the material information of the roof and the cable route will provide information about the construction to be designed and the materials to be used in the project design. Generally, the roof of the facility is sandwich panel or trapezoidal sheet. Depending on this, the mounting type is determined. As a result of the developing technology and the increase in the popularity of solar energy, many alternatives have emerged according to roof structures. Evaluating the available alternatives according to the roof structure and deciding on the most suitable solution by experienced and expert engineers is of high importance. The materials to be used in the installation determine the life of the Solar Power Plant and the benefit it will provide to you. The idle capacity that will arise from the wrong material selection leads to great efficiency losses.
-SETUP
The installation phase actually includes one of the most important steps of the process. The experience of the roof GES company is very important here. During the installation of the roof solar system, the suitability of the project and the workmanship to be made are very effective on the efficiency and durability of the system to be installed. It contains a lot of detail from the proper installation of the roof solar panels, to the cable connection, to the sealing to be provided during the construction assembly, to the prevention of insulation faults that will occur.
Solar panels may not provide enough power for some industries. For example, heavy manufacturing and metalworking require very large currents and specialized electricity distribution that solar power cannot yet provide. However, rooftop solar has enormous potential to alleviate energy poverty and deliver clean and pollution-free power to consumers around the world.